Spannungsanzeige zum Einbau im Modell

• für 4,8 oder 6 Volte (einstellbar)
• extrem leicht 4,3 g
• Anschluss einfach am Empfänger

NOTES FROM OUR TECH DEPARTMENT

         This is the VoltWatch2 on-board Receiver Battery Monitor for
                   4.8V and 6V NiCd and NiMH receiver packs.
    This mounts on the outside of the airplane, so you can see at a glance
        the status of the receiver battery mounted inside.

FEATURES: 7-LEDs provide instant, accurate battery voltage status of Low, Safe,
            or Max. Only one LED glows at a time
          Small switch to select 4.8V or 6V battery
          Very lightweight, only .15oz (4.3g) unit can mount on the side
           of the fuselage, or under the plane's canopy
          Draws amazingly low current - from 4-34mA depending on the battery
           voltage
          Plugs into any open receiver channel using a Futaba J connector
          One year warranty

INCLUDES: One VoltWatch2 On-Board Receiver Battery Monitor w/Futaba J plug
          One 1.5"x1" piece of double sided mounting tape

REQUIRES: Plugging into any unused receiver port
          Mounting onto the airplane with double-sided tape

SPECS:    Length: 1.65" (42mm)
          Width:   .63" (16mm)
          Height:  .16"  (4mm)
          Weight: .15oz (4.3 grams)
          Current Draw: approx 4-34mA

COMMENTS: This has a Futaba J connector pre-installed. For radios other than
            Futaba, you will have to change or modify the plug.
          Because of reverse polarity, if you would like to use this with the
           older Airtronics batteries, you must also purchase AIRM4400