Scott Gray Reactor X2 15A/6.8V Triple Output Regulator System

Der SGP Reactor ist eine Weiterentwicklung des bekannten Reactors. Jedes der 3 Taumelscheibenservos erhält eine getrennte Spannungsversorgung. Die Spannung kann zwischen 6,0 und 6,8V gewählt werden. Füe Empfänger, Kreisel und Drosselservo steht ein Ausgang mit 5,2 V zu Verfügung. Der Reactor X kann konstant 10A liefern, Spitzenstöme bis 15A sind möglich. Das Gerät wird mit JR Universal Patchkabeln geliefert und kann somit für alle JR oder Futaba kompatiblen Stecksysteme verwendet werden.

Reactor X2 Features and Specifications: “Never-shut-down” circuitry ensures constant power delivery in any possible condition with system always reverting to power ON Exclusive Voltage Bus selectable output setting, no setup required Quick-charge cable, direct power to servos, redundant RX power, and fail-safe-on logic switch Use on/off switch harness of any type, or power on with removable pin-switch jumper included Triple redundant receiver power and direct current to CCPM Servo Bus

Input Voltage Supply	7.2-8.4V
Output 1 (CCPM/3Servo BUS)	6.0V, 6.8V or 8.4V (unregulated) selectable; 15A+
Output 2 (RX, Gyro, Tail Rotor)	5.2V; 5.0A
On/Off Failsafe	Reactor failsafe to ON if switch failure
Compatibility	JR, Spektrum, Futaba, Hitec, etc.
Battery types supported	Li-Poly, Li-Ion, Ni-MH, Ni-Cad
Fast charge capable	Included fast charge cable
Weight	56.5g
Batt/Charge connector	Deans ultra plug style

The NEW Reactor X2 has been redesigned to include our most requested feature, direct unregulated voltage to the cyclic servos while maintaining safe, regulated 5.2v power to the receiver, gyro, tail servo and other sensitive equipment.

As the unfailing heart of your helicopter. The Reactor X2 generates noticeable servo power, which provides consistency and agility for both 3D and F3C flight. Providing power to the servos and receiver on dual power bus voltage regulators, the Reactor X2 is one of the first of its kind to provide split power output and servo bus technology to the R/C heli market.

A lot is riding on the power system of any r/c heli, don't trust anything less than Reactor X2… the old saying is true - you get what you pay for.

New X2 Features

We’ve added what customers wanted to the popular, proven, and high quality ReactorX regulator.

• Three selectable voltage settings of the CCPM servo bus (regulated 6.0V, regulated 6.4V, NEW unregulated 8.4V)
• Supports over 15 Amps of continuous output for use with any servos on the market.

The preset CCPM voltages are: 6.0V regulated for all standard and digital servos. 6.8V regulated for high voltage type servos and brushless series servos. In addition the new X2 now allows full unregulated Li-Po voltage (8.4V at full charge) to pass directly to the servos for maximum voltage to HV type servos.

Reactor X2 allows pilots to use HV servos on any type of receiver that normally would not allow direct Li-Po power supply. Certain Futaba, JR and other receivers do not permit direct Li-Po input voltage but can now be used with Reactor X2 by passing high voltage directly to the CCPM servos and a safe 5.2V to the receiver.

Dual Power Bus, Dual Regulators

The original Reactor X was the first helicopter voltage regulator system to offer dual regulators with servo power bus connections. The challenge of any power system is to supply current to hard-working servos safely and with the lowest resistance possible. Single battery setups with undersize wires and connectors don’t cut it anymore. Reactor X and the NEW Reactor X2 solves the power supply issue.